Note appearance general boat once inflated. The fabric should not look earthy if the material is PVC, although this is perfectly normal if it’s a Hypalon boat. A boat with better-looking than should have, is an indicator that the owner is trying to cover his true state applying Vaseline or some restorative oil. These tactics may notice to find an oily film on the surface of the pot. Such treatments in the extreme damage the integrity of the boat, and insurance will cause that seams end up yielding quickly. If you have difficulty to determine if it is made of PVC or Hypalon, there is a very simple test that can help you.
Pour a few drops of Polish Remover nail on the surface of the pot. If this becomes sticky after a short time, the boat is PVC. You should do this test in an area that is not in view, because it can leave a small stain. But you can be sure that the boat will not suffer any damage. The next thing to do is to inspect the seams of the boat. The best way to do this is with a solution of water and dish detergent. Apply the mixture by all seam, and wait and see If bubbles form.
Small bubbles indicate the presence of a leak at the seam. A few minor leaks are completely normal, especially in those boats made of Hypalon, who suffer from some loss of air. Then you should proceed to check the following parts of the boat, including the valves of inflator, oars, any part of wood, windshield, seats and storage pouch, pump for inflation and repair kit. If you do not like the idea of doing everything this only, always has the option of requesting a review, especially if you buy a large and expensive, like one RIB boat. For more information about how to buy a used inflatable boat visit: original author and source of the article